Description
The 4K Tessera SX40 LED processor combines our industry-leading feature set and easy-to-use software interface with our highest-ever capacity processor.
Tessera SX40 offers support for full 4K screens at 60Hz with 12 bits per colour output. It supports a zero-latency up/down scaler that matches the source to the screen as well as all of Tessera’s industry-leading processing features. These include HDR and Dynamic Calibration as well as Extended Bit Depth, HFR+ (High Frame Rate), Frame Remapping, and more. Additionally, Stacking can be used to control multiple SX40 processors as one.
PHYSICAL SPECIFICATIONS
Dimensions (WxHxL): 482.6mm (19”) x 88.9mm (3.5”) x 406.4mm (16”)
Rear width: 431.8mm (17”)
Weight: 7.50Kg (16.53lbs)
ELECTRICAL
Switched autoranging power supply
100 – 240V AC
50Hz – 60Hz
1.2 – 0.6A
GENLOCK
Bi-level and Tri-level sync
Sync to source
Processors genlock from source right through to panel refresh
Frame rates from 23.98 to 60Hz
HDMI 2.0 INPUT & RE-CLOCKED THRU PORT
One HDMI 2.0 input
Full 18Gbps HDMI 2.0 bandwidth, maximum 600MHz pixel clock
Up to 4096 x 2160 resolution (progressive only)
23.98Hz to 250Hz framerate
8,10 and 12 bits per channel colour depths
RGB and YCbCr 4:4:4, 4:2:2 and 4:2:0
Compatible with DVI-D and DisplayPort sources via adapters
SDI INPUT & RE-CLOCKED THRU PORT
One 12G SDI input that supports the following:
HD-SDI – ST-292
3G-SDI – ST-424, Level A and Level B-DL
6G-SDI – ST-2081
12G-SDI – ST-2082, 2SI format
Up to 4096 x 2160 resolution (progressive only)
23.98Hz to 60Hz framerate
10 bits per channel colour depth
YCbCr 4:2:2
OUTPUTS
Four 10GBASE-T copper output ports
Supports nominally 9 million pixels at 36 bits per pixel @ 60Hz
Supports Neutrik etherCON Cat 6A / etherCON (CAT5e) connectors
Compatible with standard Cat6A / Cat5e RJ45 connectors
Requires Cat6A cable (up to 60m) or Cat5e cable (upto 30m)
Four 10GBASE-LR Tessera XD fibre output ports
Supports Neutrik opticalCON DUO / DUO ARMORED / DUO X-TREME / DUO LITE connectors
Compatible with standard LC-Duplex connectors
Requires 1310nm, 9/125um single-mode fibre (up to 2KM) with PC or UPC connectors
Each 10G output independently auto-switches between fibre and copper
Closed loop redundancy support
Processor redundancy support
