PixLite E16-S Mk3

SKU: ASTERA-FP6-HYDRA-1 Category: Tags: , , , , , , , , , , ,


The PixLite® E16-S Mk3 is an economical, but powerful pixel LED controller built upon Advatek’s 3rd generation PixLite® Mk3 processor..

The PixLite® E16-S Mk3 drives up to six universes of data on each of its 16 outputs, for a total of 96 universes of LED pixel control. This mighty, budget-friendly pixel controller is suitable for installations where pixel power is not routed through the pixel controller.

Advatek’s Mk3 family of pixel controllers is tested and certified for professional and commercial applications. Wherever your project is, you can confidently deploy an Advatek pixel solution with class-leading value, performance and features. The Mk3 family is protected electrically, won’t interfere with other building management and control systems or affect other sensitive RF, network and communications infrastructure.

Delivering unforgettable results in live and standalone environments, the PixLite® E16-S Mk3 pixel controller has 16 outputs to connect to 16 runs of pixels, and provides unbeatable value for money. This lightweight but incredibly powerful device gives you ultimate control over your installation.


96 universes of Art-Net or sACN
16 non-powered pixel outputs
Expanded mode for data only pixels (32 Outputs)
Over 60+ pixel protocols supported
Configure using Advatek Assistant 3 or any web browser
Electrical fault protection on all ports
Gamma correction for pixels of all resolutions.
Dithering for higher resolution pixel control.
Extremely fast refresh rates.
Dynamic adjustment.


Ethernet port: 1 x 10/100 mbit/s
Microsd card slot (for Advatek SHOWTime™)
Auxiliary port: 1 x rs485 input/output (for DMX512 In/Out)
Pixel outputs: 16 (non-powered)
Input power: 5v – 24v dc
Maximum power consumption: 3.5w


Dimensions: 114.5 mm x 149.5 mm x 35.5 mm
Weight: 0.2kg
Ambient Operating Temperature: -20°c to +70°c
Housing Material: ABS
Wall & din-rail mountable