Advatek PixLite E4-S Mk3

Description

Ideal for impactful environments like smaller-scale theme parks, stages or architectural installations, the PixLite E4-S Mk3 LED pixel controller is perfect for situations where you need to use a few pixel runs in the same area. For larger-scale installations, check out the T8-S Mk3.

The PixLite® E4-S Mk3 is an economical but powerful pixel LED controller built upon Advatek’s third generation PixLite® Mk3 processor. The PixLite® E4-S Mk3 drives up to six universes of data on each of its four outputs for a total of 24 universes of LED pixel control. This mighty, yet budget-friendly pixel controller is suitable for installations where pixel power is not routed through the pixel controller.

Advatek’s Mk3 family of pixel controllers is tested and certified for professional and commercial applications. Wherever your project is, you can confidently deploy an Advatek pixel solution thanks to its class-leading value, performance and features. The Mk3 family is protected electrically, won’t interfere with other building management and control systems or affect other sensitive RF, network and communications infrastructure.

Features

24 universes of Art-Net or sACN
4 non-powered pixel outputs
Expanded mode for data only pixels (8 Outputs)
Over 60+ pixel protocols supported
Configure using Advatek Assistant 3 or any web browser
Electrical fault protection on all ports
Gamma correction for pixels of all resolutions.
Dithering for higher resolution pixel control.
Extremely fast refresh rates.
Dynamic adjustment.

SPECIFICATIONS

Ethernet port: 1 x 10/100 mbit/s
Microsd card slot (for Advatek SHOWTime™)
Auxiliary port: 1 x rs485 input/output (for DMX512 In/Out)
Pixel outputs: 4 (non-powered)
Input power: 5v – 24v dc
Maximum power consumption: 2.5w